Introduction of fire suit 3c
Firefighter protective headgear (flame-retardant headgear) is mainly used to protect the head, side and neck during firefighting operations, from fire or high temperature burns. It meets the requirements of GA869-2010 "Firefighter's Protective Headgear for Fire Fighters", and can provide test reports and 3C certificates. It is made of essential flame-retardant materials such as aramid. It has excellent fire and flame retardant properties, and will not continue to burn in case of open flames. Its large elasticity and good softness make the product easy to wear, comfortable and excellent in function. The humanized design can effectively protect the wearer's entire head safety, and is mainly used in the fields of fire protection, steel, petroleum, and chemical industries.
Technical characteristics
1. Flame retardant performance: warp damage length is 7mm, weft damage length is 5mm, continuous burning time is 0s, no melting or dripping phenomenon.
2. After the 260℃ thermal stability test, the dimensional change rate along the warp and weft directions is 2%, and the sample surface has no obvious changes such as discoloration, melting and dripping.
3. The anti-pilling grade of the fabric is level 3, no formaldehyde content is detected, the PH value is 6.72, the seam strength is 1213N, and the size change rate of the face opening is 2%.
4. The washing size change rate is 3.4% in the vertical direction and 2.9% in the horizontal direction.
Technical characteristics
1. Flame retardant performance: warp damage length is 7mm, weft damage length is 5mm, continuous burning time is 0s, no melting or dripping phenomenon.
2. After the 260℃ thermal stability test, the dimensional change rate along the warp and weft directions is 2%, and the sample surface has no obvious changes such as discoloration, melting and dripping.
3. The anti-pilling grade of the fabric is level 3, no formaldehyde content is detected, the PH value is 6.72, the seam strength is 1213N, and the size change rate of the face opening is 2%.
4. The washing size change rate is 3.4% in the vertical direction and 2.9% in the horizontal direction.
Next Article:
Last Article:
Request A Quote
Related Products
Fire suit ZFMH -JP W01
A professional protective suit is the necessary equipment for emergency workers, which needs ergonomic design, comfortable wearing experience and high-quality materials.
Hot Sale SCBA Black Safety Plastic Box Breathing Apparatus Plastic Case
Firefighter Breathing Apparatus Portable Carry Box SCBA Storage Box Safety Plastic
Fine Water Mist Fire Extinguisher Gun
Backpack-mounted high-pressure fine water mist fire extinguisher gun
Fire Fighting Water Mist Fire Suppression System
High Quality Fire Suppression CAFS System Firefighter Spray Foam Unit
Backpack CAFS Compressed air Fire Fighting System
FTK-F2
Fire helmet is designed for firefighting operations and provides protection against impact, penetration, heat and flame.
Single layer suits JP RJF-F04
Color orange and flame blue :98% Temperature-resistant aramid and 2% anti-static, Fabric weight: approx. 180g/m2
Fire Suit SQA-H02
This combat suit is for firefighters' daily training, drills, and for use during regular company training. It cannot be used in actual combat scenarios. For actual combat situations, one should wear the combat suit that complies with actual combat requirements as stipulated by the state.
Quick Consultation
We are looking forward to providing you with a very professional service. For any
further information or queries please feel free to contact us.