Protective hood RMT-MA

Your Position Home > Products > Fire Accessones

Quote Now

Send E-mail

Share With:

Introduction

Technical specifications

Instructions for use

Inquiry

Introduction

The hood is constructed from double-layer aramid knitted fabric, renowned for its exceptional breathability and elasticity. It exhibits resistance to water washing, maintaining dimensional stability and flame-retardant properties even after prolonged use and repeated laundering. The flame-retardant stitching ensures structural integrity, providing comprehensive protection for the head, face, neck, and shoulders to mitigate injury caused by burning debris.

Technical specifications

Protected area	The front and rear sections of the head cover overlap with the inner collar of the protective suit by more than 200mm, while the side sections overlap by more than 130mm.
Flame retardant performance of the fabric	Continuation of burning time in both warp and weft directions ≤ 0s; Damage length in warp direction ≤ 18mm; Damage length in weft direction ≤ 15mm; No melting or dripping.
Thermal stability performance	Dimensional change rate ≤ 1%; No discoloration or melting observed on samples; Water washing dimensional change rate: longitudinal & transverse directions ≤2%; Fabric has no odor.
Seam strength	347N;
Total weight approximately	122g;
Anti-pilling grade	Level 4
Formaldehyde content	None;
The overlap between facial openings and the respiratory protective mask exceeds 10mm.
The sewing thread is heat-resistant and does not melt or carbonize.
Stable performance of facial opening size variation within ±2%.

Request A Quote

Instructions for use

We have a certain scale capacity to ensure your order delivery cycle.

Protective clothing worn to save people, rescue valuable materials, and close combustible gas valves when travelling through the fire zone or entering the flame zone and other hazardous places in a short period of time. Firefighters must use water gun and high-pressure water gun protection for a long time when performing fire-fighting tasks. No matter how good the fireproof material is, it will burn in the flame for a long time.

It is strictly prohibited to use it in places with chemical and radioactive damage.

Must be equipped with air respirator and communication equipment, etc. to ensure that the use of personnel in the high temperature state of normal breathing, as well as to get in touch with the commanding officer.