JP FGE-F/A02
It is mainly used for body protection in high-temperature environments with radiant heat and sparks or molten iron splashes in welding, metallurgy, glass, ceramics, kilns, petrochemicals, and other industries.
Tearing strength:
≥ 9N/30mm
Breaking strength:
≥ 650N
Water pressure resistance:
Water pressure resistance ≥ 17KPa.
Introduction
Technical specifications
Feature
Instructions for use
Inquiry
Introduction
It is mainly used for body protection in high-temperature environments with radiant heat and sparks or molten iron splashes in welding, metallurgy, glass, ceramics, kilns, petrochemicals, and other industries.
Consisting of a composite aluminum foil fireproof fabric top layer and a comfortable layer of pure cotton, it can be equipped with a fireproof and heat-insulating layer according to needs. It can protect against up to 1,000°C radiant heat while also possessing fireproof, waterproof, flame-retardant, and heat-insulating properties. It can be used in combination with heat-insulating gloves, heat-insulating foot covers, heat-insulating head covers, heat-insulating leg covers, and fireproof and heat-insulating shoes.
Consisting of a composite aluminum foil fireproof fabric top layer and a comfortable layer of pure cotton, it can be equipped with a fireproof and heat-insulating layer according to needs. It can protect against up to 1,000°C radiant heat while also possessing fireproof, waterproof, flame-retardant, and heat-insulating properties. It can be used in combination with heat-insulating gloves, heat-insulating foot covers, heat-insulating head covers, heat-insulating leg covers, and fireproof and heat-insulating shoes.
Technical Features
| Fireproof | Flame-retardant performance: damaged length ≤ 10cm, continuous burning time ≤ 2S, no melting or dripping. * Tearing strength: ≥ 9N/30mm. * Breaking strength: ≥ 650N. * Water pressure resistance: water pressure resistance ≥ 17KPa. |
| Thermal Insulation | Reflects over 90% of radiant heat. |
| Radiation Heat Resistant | Can withstand temperatures up to 300℃ for 1 hour; 500℃ for 30 minutes; the inner surface temperature of the clothing is no more than 45℃ at a distance of 1.75m from the fire source at a temperature of 800℃; can instantly approach a high-temperature environment of over 1000℃. |
Material Features of JP FGE-F/A02
Aluminum Foil/Aramid Cloth Composite
High tensile strength, good thermal resistance, can be used for long-term applications at temperatures below 350°C;
Aluminum Foil/Pure Cotton Cloth Composite
100% high-strength pure cotton base cloth, resistant to wear and folding, can be used for long-term applications at temperatures below 200°C.
The material characterized by high temperature resistance, water washability, wear resistance, folding resistance, and no delamination.
Request A Quote
Instructions for use
We have a certain scale capacity to ensure your order delivery cycle.
Protective clothing worn to save people, rescue valuable materials, and close combustible gas valves when travelling through the fire zone or entering the flame zone and other hazardous places in a short period of time. Firefighters must use water gun and high-pressure water gun protection for a long time when performing fire-fighting tasks. No matter how good the fireproof material is, it will burn in the flame for a long time. Translated with www.DeepL.com/Translator (free version)
It is strictly prohibited to use it in places with chemical and radioactive damage.
Must be equipped with air respirator and communication equipment, etc. to ensure that the use of personnel in the high temperature state of normal breathing, as well as to get in touch with the commanding officer.
Related Products
JP FGE-F/A01
It is mainly used for body protection in high-temperature environments with radiant heat and sparks or molten iron splashes in welding, metallurgy, glass, ceramics, kilns, petrochemicals, and other industries.
JP FGE-F/A(Heavy-duty type)
Aluminized fire fighting suit designed to offer complete Personnel protection against extremely high temperature radiant heat and momentary flame contact.
JP FGE- F/A03
It is mainly used for body protection in high-temperature environments with radiant heat and sparks or molten iron splashes in welding, metallurgy, glass, ceramics, kilns, petrochemicals, and other industries.
Quick Consultation
We are looking forward to providing you with a very professional service. For any
further information or queries please feel free to contact us.